Steel Trapezoidal Roofing Tile Sheet Roll Forming Machine
The finished product of automatic roof tile roll forming machine is widely used in the construction of various industrial plants, villages, warehouses, supermarkets, hotels, exhibition, family construction, shopping malls shutter doors and etc. It has the advantage of beautiful, classical appearance and grace taste. High Quality Color Steel Building Material Roll Forming Machinery.
Wall Panel Roll Forming Machine Technical Parameters:
1. Length × width × height: 5500mm×1300mm×590mm
2. Forming shaft: diameter 70mm 45# quenched and tempered
3. Forming wheel: material 45# forged hard chrome plated
4. Transmission mode: sprocket, chain
5. Motor: 3KW
6. Number of forming rows: 11 rows
7. Automatic computer fixed-length cutting system:
8. Pump station motor: 3KW four-stage
9. Shearing mold: Gr12
10. Forming speed: 8-10m/min
11. Pressing thickness: 0.2-0.7mm
12. Pressing width: 1000m
Wall Panel Roll Forming Machine main feature:
1. Flat board shape and smooth lines.
2. After technical research, there is no wave on the small side of the plate shape, and the lap joint is accurate and reasonable, which can effectively waterproof and prevent rain.
3. Advanced technology: This line uses continuous coiled material to produce precision-determined length after cold-bending forming. The cut-off parts are once formed into regular shapes, precise and consistent in length. The shape of the workpiece has good appearance and high strength.
4. High productivity: The line only needs 2-3 people to operate, the operation is simple and the labor intensity is low. The production speed of the line is infinitely adjustable from 0 to 20 meters per minute, and the normal operating speed is 14-16 meters per minute.
5. High reliability: The main components of the hydraulic, pneumatic, and electrical systems of this line are all imported high-quality components, stable and reliable, high technical parameters applicable materials, hot-rolled steel plate SS490 SS440 q235A Q195 SPHC cold-rolled steel plate SS490 SS440 applicable material thickness 2.0— The rolling speed of 4.0mm parts is 0-20m/min. The weight of a single piece is 5000kg. The inner diameter of the coil is φ508±10mm φ610±10mm. The width of the coil is 100-450mm. The total installed power is about 250kw.
| Suitable Raw Material | 0.3-0.8mm, Color steel coil, Galvanized coil, Aluminized zinc coil or as your request |
| Under Frame | 300 H-beam |
| Sidewall | 16mm |
| Roller | High grade 45# steel, processed by CNC lathe, hardening and tempering, polishing, hard chrome plated 0.05-0.07mm, with keyway |
| Shaft | 70mm, finish turning, cylindrical grinding, with keyway |
| Forming Stations | 13 rows |
| Cutting blade | Cr12Mov, quenching 58-62°, double oil cylinder |
| Chain | 1 inch |
| Main Motor | 5.5kw, Lichao, Shanghai, with reducer |
| PLC | DELTA, TAIWAN |
