Corrugated Aluminium Galvanized Metal Roof And Wall Sheet Tiles Roll Forming Machine
Product Description
It has advantages as follows:
1). Widely used. The corrugated roofing sheets are new popular roofing sheets. The produced corrugated roofing sheets are widely used in modern factories, such as workshop, 4S auto shop.
2). This corrugated roofing sheet roll forming machine is easy to operate, easy to maintain, and the maintenance cost is very low.
3). This corrugated roofing sheet roll forming machine is very popular in the Middle East countries, such as Saudi Arabia, UAE, Pakistan, etc.
Equipment Detailed Parameters:
| No. | Item | Description |
| 1 | Coil | Width:1220mm & 1450mm |
| 2 | Forming speed | 8-15 m/min (not including cutting time) |
| 3 | Roller Stations | 9 stations & 22 stations |
| 4 | Material of Roller | 45# steel finish machining, plated hard chromium surface |
| 5 | Material of Main Shaft | 45# steel finishing machining and then slack quench processed |
| 6 | Material of Shaft | 70 mm 45#steel forged |
| 7 | Driven Motor Power | 5.5 KW |
| 8 | Hydraulic Station Power | 4 KW |
| 9 | Hydraulic Station Pressure | 12.0 Mpa |
| 10 | Electrical Control System | Panasonic PLC |
| 11 | Dimension (L*W*H) | 11000mm*1500mm*1500mm |
| 12 | Material of Cutter | GCr12 |
| 13 | Driving Mode | single chain 1 inch |
| 14 | Material Thickness | 0.3-0.8mm |
| 15 | Power Supply | 415V, 50HZ, 3 PHASES |
| 16 | Cutting accuracy | ±2 mm |
What is the Technical Parameters?
Power:4kw, The target piece's length is adjustable and digit of
Hydraulic oil: 40# it can be adjusted.Computed mode has
hydraulic oil into the hydraulic oil tank , the pump two modes: automatic and manual one.
drive the cutter machine to begin the cutting job. The system is easy to operate and use
Material of the cutting:Cr12Mov with quenched It adopts welded steel and supported roller to
treatment.It can decide cut panel dimension transmit the products,which is used to collect
according to the hydraulic drive and PLC computer the finished products.
control system.
FAQ:
Q1. What is your advantage?
A1: We have over 10 years‘ experience on roll forming machines production. Experienced engineers and workers will be helpful for quality control.
Q2. Do you have after-sales support?
A2: Yes, we are happy to give advice and we also have skilled technicians available across the world. We need your machines running in order to keep your business running.
Q3. Do you sell only standard machines?
A3: No, most of our machines are built according to customers specifications, using top brand components.
Q4. Can you be responsible for transport?
A5: Yes, please tell me the destination port or address.we have rich experience in transporting.
